This MeanWell Power Supply can power 800 LEDs across 2-XT60 Connectors for your Stage Christmas Trees.
This adaptor is to clip a simple XT60 Female connector to the + / - Wires on a String of LEDs.
Better Images Coming Soon.
Christmas Tree WS2811 Pixel Calculator
For BTF-LIGHTING WS2811 12mm pixels (50 pixels per strand · Model: single spiral up a cone)
Connect these Controllers to all of your Christmas Trees on Stage and Control Hundreds of Channels of Addressable Lights via Art-Net. Don't have that many Art-Net (Digital DMX) channels available? Use Zones mode to control ALL Pixels with a minimum of 3 DMX Channels.
LED Pixels from BTF Lighting: Order on Amazon
https://amzn.to/48ZXFOj
Company: BTF Lighting
Addressable: Yes
Pixel Count: 50 pixels
Length: 13ft
Voltage: 12V
Power: 0.3W/LED
This wire is calculated and sold by the foot ($2) based on the size of your tree. 14AWG wire is used for Power Injection each 150 LEDS. 1-6ft wire is included in the Full Tree Kit.
Connect this Controller & Power Supply to your Christmas Tree and Control the LED Pixels over WIFI via Art-NET from your Stage/ Event Lighting System. Each LED Pixel can be controlled as a whole, or as smaller groups with the Zones Mode, Configurable from the WebPage.
How Many Pixels Do You Need Per Size Tree?
Click Here: Check Out Our Pixel Calculator
What is this system?
This system is an LED Controller capable of connecting to WIFI and either using the WebPage to select RGB colors, or receiving Art-Net (Digital DMX) from a Lighting System.
What is Included?
1-Power Supply,
1-Controller,
2-Power Cables &
1-IEC Cable.
Each purchase includes 1-Controller capable of receiving Art-Net and pushing RGB data to 975 pixels. 1-Power Supply good for 16 strings of 50 LEDs, with a voltage booster recommended every 150 LEDs, One booster wire is Included.
What Else Do I need to Purchase?
*LEDs are NOT Included. BTF-LIGHTING is HANDS DOWN our Recommended LED supplier. This system is designed to use with these WS2811 String Lights BTF-LIGHTING: https://amzn.to/4p8HTr2
How Many Systems do I need to Purchase?
*Purchase one System per Christmas Tree. If Multiple Trees are close together, You can connect about 975 pixels to the controllers output. It’s recommended to introduce power to the pixels every 150 LEDs. One included Power Supply can power a MAX of 16 strings of 50 LEDs between the 2-XT60 connectors on the PSU. After that you must add power supplies to the system.
How do I use this system?
Step 1: Connect this PCB to a computer via USB-C.
Step 2: Navigate to “config.CrazyAmazingDesigns.com”
Step 3: Connect to the Board via Serial.
Step 4: Type and Upload new SSID, PWD, IP info.
Step 5: Connect Controller to Power and Connect to WebPage via Specified IP address.
Step 6: Set # of Pixels, Art-Net or Art-Net Zones.
Step 7: Send Art-Net to Controller from Lighting System.
Update WIFI?
Connect the Controller via USB-C to a computer to update the WiFi SSID & PWD, as well as IP address. That way no matter if you loose connection to the device over WIFI you can always have an easy way to update the WIFI info.
This Adaptor is Critical for Powering Larger Tree Projects.